Topps Safety Apparel Inc.
What's New?...


Flame Resistant Industrial Apparel
Fire Service & Medical Technicians
Public Service & Security Apparel
Flame Resistant Fabric Information
Links and Information
Contact Us
Topps Home Page
NEWS FLASH fromTopps
September 2003
Extrication Suits of FR Cotton INDURA®
Jackets & Pants for Wildland Fire Fighting (Brush Gear)
Classified to N.F.P.A. 1977 - 1998 Edition
Wildland Fire Fighting Clothing with N.F.P.A. 1977 (1998 Edition) has recently been added to the Topps collection. It should be noted that these garments are cut with much more looseness that other Topps garments. As specified by N.F.P.A. 1977, the looseness in the torso, arms and legs is provided to insurethat insulative air spaces are maintained within the garment. Care should be taken when sizing since these styles have fit charactoristics which are not comparable to otherstyles from Topps collection. Try-on garments should be used to ensure the correct fit. In addition to the standard styles featured below, we would also be happy to quote for the supply of brushgear styles manufactured to individual fire department specifications. Additionally, our standard and custom garments can be supplied with reflective trim ti ensure high safety levels for the fire department personnel operating in low visibility enviroments.
Model #JK12 5648 NOMEX® IIIA Yellow
Model #JL12 3948 INDURA® Yellow
Jacket # JK12 5648JACKET
Fabric: 6.0 oz. per square yard. DuPont Nomex® IIIA aramid or 9.0 oz. per square yard Indura®
  • long style to ensure adequate interface with pants
  • radio pocket on left front with flap closure
  • bellowed breast pocket with flap closure
  • two bellowed lower pockets with flaps
  • hook and loop closure on sleeve cuffs
  • large collar with throat piece with hook and loop closure
  • heavy-duty zipper with NOMEX® zipper tape
    		•
    Jacket and Liner Sizes Available:
    Small/Regular - 2X - Large/Regular
    Large/Tall - 2X - Large/Tall
    Model #PA12 5648 NOMEX® IIIA Yellow
    Model #PA12 3948 INDURA® Yellow
    Pants # PA12 5648PANTS
    Fabric: 6.0 oz. per square yard. DuPont Nomex® IIIA aramid or 9.0 oz. per square yard Indura®
  • waist adjustable with hook and loop take up tabs
  • outseams and seat seam are reinforced by topstitching entire length
  • two bellowed cargo pockets with hook and loop closures on flaps
  • waistband closes with heavy-duty snap
  • hook and loop take up tabs on leg bottoms
  • two patch hip pockets with flaps and hook and loop closure
  • bottoms of side pockets are reinforced using an "X" bartack
  • sewn throughout with NOMEX® thread
    • Sizes Available:
    Waist 20-42 (Even Sizes) Inseams 30-34 (Even Sizes)
    All pants will be supplied with finished leg bottoms
    (hook and loop take up tabs on leg bottoms)
    See also:

    Eye on Industrial & Petrochemical

    Focus on Fire and Emergency Medical Services

    Top of Page This site developed and maintained by
    Internet Business Solutions, Inc., © 2003. All rights reserved.